Write a Policy Manual for Treatment Individuals Essay

Write a Policy Manual for Treatment Individuals - Essay Example It is therefore important that policy governing treatment individuals in the prisons should be formulated with the prisoners and officers in mind so as to ensure observation of human rights. The International Convent on Civil and Political Rights states that â€Å"All persons deprived of their liberty shall be treated with humanity and with respect for the inherent dignity of the human person.† The American Convention on Human rights under article 5 section 2 also states and emphasizes the importance of the same. It is therefore very important for all professional working in prison facilities to observe basic human rights conventions, ethical standards and policies set by judicial authorities when carrying out their jobs in correcting behavior of prisoners placed under their care. A good policy should emphasize observation of certain important rationale in making decisions on issues of ethical concern such as the rights enjoyed by prisoners, their privacy and even medical health. This is because they are public servants, earning from public coffers and as such should perform their duties in a manner that makes assures public confidence in the institutions of corr ection. Professionals working in prison facilities should always make sure to fully identify all facts so as not to act with probabilities or leave room for future prediction. They should also refer to relevant value systems as well as concepts on handling ethical issues such as privacy in the best possible interest. For instance in the case where a prisoner is sick and requires special urgent medical attention yet the rules restrict entry any officer to the prisoner’s room at the time. It will be the responsibility of the officer to make the life saving decision of ensuring the prisoner is attended while referring to available rules and concepts. Officers should also make it their job to ascertain all moral

Hominin study guide Coursework Example | Topics and Well Written Essays - 500 words

Hominin study guide - Coursework Example They are close the human relatives. This is from the fact they have some features that are close to the modern man. Their body has been shorter just as of the modern man. However, theirs were relatively shorter to that of the modern man. They used sophisticated tools and they made use of fire to warm them, to scare away animals and even to cook their meat. Their skulls have been found in various parts of the world, thus resulting to their various names. The following is a list of their names, characteristics and location they were found (Sawyer 357). As their names, suggests they are considered wise because of how they manipulated the environment to their advantage. They are referred to as anatomically modern human from the fact that some members of this group had physical features that are analogous to those of the human beings. The following are subgroups and their characteristics (Sawyer

Writing a Marketing Strategic plan for the Light bulb Essay

Writing a Marketing Strategic plan for the Light bulb - Essay Example According to them these bulbs are capable to produce light which is equivalent to 40 watt incandescent bulbs. Even though this light is with lesser consumption of power, the led bulb manufacturing companies in North America are in a hurry to find solutions to reduce the heat emitting from every led bulbs during their lighting process. If such bulbs are made available in the market, their expected price will be nearly $60. But reputed bulb manufacturing firms have proposal to reduce the price of such bulbs and make them available at price $30 or $20 if their product gets movement in the market.( Alex, Wilson,May.2010) Apart from reducing the price of their products all reputed firms intention is to introduce sophisticated technologies in the manufacturing process and develop an image in the minds of consumers. The light business in North America is highly competitive. Hence the strategies should be in such a way to cope up with the prevailing competition in the global market. No business men can fool the customers for a fairly long time. Hence the products launching in the market must be able to secure confidence from the side of customers. The confidence of customers has some key roles regarding the good movement of the launching products. Hence, once they could gain confidence from the customers, they need not turn back afterwards. Thus the resources introducing must be able to develop confidence among the customers. Nowadays the customers have tendencies to go beyond products which are environmental friendly.( Alex, Wilson May.2010) Thus in the case of bulb business people prefer economic bulbs which can emit negligible quantity of heat. Certain other bulb contains mercury and during the lighting process of these bulbs mercury vapors will be spreading in the atmosphere. Since mercury v apors are toxic the customers will not welcome such bulbs since they are not environmental friendly. Hence

Hominin study guide Coursework Example | Topics and Well Written Essays - 500 words

Hominin study guide - Coursework Example They are close the human relatives. This is from the fact they have some features that are close to the modern man. Their body has been shorter just as of the modern man. However, theirs were relatively shorter to that of the modern man. They used sophisticated tools and they made use of fire to warm them, to scare away animals and even to cook their meat. Their skulls have been found in various parts of the world, thus resulting to their various names. The following is a list of their names, characteristics and location they were found (Sawyer 357). As their names, suggests they are considered wise because of how they manipulated the environment to their advantage. They are referred to as anatomically modern human from the fact that some members of this group had physical features that are analogous to those of the human beings. The following are subgroups and their characteristics (Sawyer

The impact of social on the fashion luxury consumer Dissertation

The impact of social on the fashion luxury consumer - Dissertation Example tant Facts 32 Figure 7: Age 41 Figure 8: Nationality of the respondents 43 Figure 9: Hours spend on internet 44 Figure 10: Profile on social networks 46 Figure 11: Hours spend on social networks 47 Figure 12: media use to follow fashion trends 49 Figure 13: why you use social media network 51 Figure 14: How you feel about advertising on social media 53 Figure 15: have you ever purchased a product or service based on an advertisement on a social network 54 Figure 16: which of the social media technologies you use 55 Figure 17: how many twitter followers you have 58 Figure 18: how many people do you follow on twitter 59 Figure 19: do you use social media in an official business or professional capacity 61 Figure 20: Are you a member or fan of a brand page on facebook 62 CHAPTER #1: INTRODUCTION 1.1. Overview of the research study: It is believed that Egyptians were amongst the pioneers of using luxury fashion products, as their people especially elites were very much concerned about th e way they look, moreover prejudices system was very much practiced at that time. Prominent people in order to differentiate themselves with the masses used high quality products which were well crafted, and the materials used for making these products were of supreme quality. However with the passage of time various innovations came in this world. That has resulted in changing the perceptions and shape of this world. Luxury products which were initially confined or related with elites are now being used by masses because of affluence factor. At present luxury products are being used by different people around the world and luxury brands are searching for new ways in order to target consumers. It was industrialisation and later globalisation that has resulted in changing the shape of the... It is believed that Egyptians were amongst the pioneers of using luxury fashion products, as their people especially elites were very much concerned about the way they look, moreover prejudices system was very much practiced at that time. Prominent people in order to differentiate themselves with the masses used high quality products which were well crafted, and the materials used for making these products were of supreme quality. However with the passage of time various innovations came in this world. That has resulted in changing the perceptions and shape of this world. Luxury products which were initially confined or related with elites are now being used by masses because of affluence factor. At present luxury products are being used by different people around the world and luxury brands are searching for new ways in order to target consumers. It was industrialisation and later globalisation that has resulted in changing the shape of the globe. Things that took great amount of time in their makings are now made instantly. Various developments around the world were carried out with rapid speed. In the context of businesses these developments proved to be fruitful, as their products manufacturing showed enhancement and furthermore their reach to the market expanded from small cities or villages to the far flung areas of the world. Therefore businesses in order to expand and introduce their brands globally followed various styles and endorsed their products through advertisements and marketing using print media (newspapers, leaflets etc) electronic media (radio, T.V etc).

The rise of Single Parenthood in Contemporary Britain Essay Example for Free

The rise of Single Parenthood in Contemporary Britain Essay Sociology has given us insights into our understanding of the rise in single parenthood in Contemporary Britain. Single-parent families have become increasingly common in Britain. According to government statistics, in 1961, 2 per cent of the population lived in households consisting of a lone parent with dependent children, but by 1998 this had more than tripled to 7 per cent.  According to Hantrais and Letablier (1996), Britain has the second highest rate of lone parenthood in Europe, and is exceeded only by Denmark, and rates in countries such as France, Greece and Portugal are much lower than those of Britain are. Children may start their life living in a single-parent family. However, the single parent may well find a new partner and marry them or cohabit with them. The child will then end up living with two parents.  It should also be noted that many children who live in a single-parent household do see and spend time with their other parent. Further more even in two-parent families, one parent (usually the mother) might be responsible for the vast majority of the childcare. There are many reasons why lone parenthood can come about. People who are married can become lone parents by divorce, separation or death of a spouse. Lone parents who have never been married may have been living with the parent of the child when the child was born, but they subsequently stopped living together. They may not have been living with the parent of the child when they were born. Official statistics give some indication of the frequency of the different paths to lone-parenthood, but do not provide a complete picture. Official figures for Britain shows that the largest proportion of female lone parents in 1995-7 were single, with about a third being divorced and just under a quarter separated. The figures for those who were single do not differentiate between those who were cohabiting when the child was conceived and those who were not. These proportions have changed over time. Clearly the rise in lone motherhood is closely related to increases in the divorce rate and tot he increase in births outside marriage. The increase in single lone mothers may partly result from a reduction in the number of shotgun weddings. Marriages that resulted from pregnancy were often unstable and could end up in producing lone motherhood through an eventual divorce or separation. Now, the partners may chose to cohabit rather than marry and, if their relationship breaks up, they end up appearing in the statistics as a single, never married, parent. The absence of cohabitation does not necessarily imply that the parents do not have a close relationship some writers see the rise of single parenthood as a symptom of increased tolerance of diverse family forms.  There are a number of reasons for supposing that the welfare state is not responsible for the increases. Some commentators dont believe that lone parenthood gives advantages to those seeking local authority housing. In 1993 John Perry, policy director of the Institute of Housing, said Ive not been able to find a single housing authority which discriminates in favour of single parents over couples with children. The homeless get priority, but there is no suggestion that a homeless single parent gets priority over a homeless couple. Single parents who are reliant upon benefits tend to live in poor housing conditions and to have low standards of living. There is little material incentive to become a single parent. There is evidence that a large majority of single parents do not wish to be reliant on state benefits. They would prefer to work for a living but find it impractical to do so. Single parenthood has increasingly become a contentious issue, with some arguing that it has become a serious problem for society.  A vast majority of the population would still agree, I think, that the normal family is an influence for good in society and that one-parent families are bad news. Since not many single parents can both earn a living and give children the love and care they need, society has to support them; the children suffer through lacking of one parent While most commentators agree that single parenthood can create problems for individual parents, many sociologists do not see it a s a social problem, and some see that it is a sign of social progress.  Some view the mother only family as an indicator of social disorganisation, signalling the demise of the family. Others regard it as an alternative family form consistent with the emerging economic independence of women. More controversial that the low average living standard of lone parents is the question of the psychological and social effects on children raised in such families. Findings of a number of American studies, which seem to indicate that children are harmed by single parenthood. These studies have claimed that such children have lower earnings and experience more poverty as adults; children of mother-only families are more likely to become lone parents themselves; and they are more likely to become delinquent and engaged in drug abuse. The findings of such studies must be treated with caution. In a review of research in lone parenthood, Louise Burghess notes that some research in the relationship between educational attainment and divorce suggests that children in families where the parents divorce start to do more poorly in education before the divorce takes place.  David Morgan does believe that the evidence suggests that the children of single parents fare less well than those from two-parent households. He qualifies this by saying that we still do not know enough about what causes these differences; as with the effects of financial hardship, the children would be affected by the stigma attached to coming from a single-parent family.  It is very difficult to disentangle the direct and indirect effects on children of being brought up in a single-parent household and therefore dangerous to make generalisations about such effects.

Isopropyl Alcohol Can Be Oxidized Environmental Sciences Essay

Isopropyl Alcohol Can Be Oxidized Environmental Sciences Essay Being a secondary alcohol, isopropyl alcohol can be oxidized to acetone, which is the corresponding ketone. This can be achieved using oxidizing agents such as chromic acid, or by dehydrogenation of isopropyl alcohol over a heated copper catalyst: (CH3)2CHOH ? (CH3)2CO + H2 Isopropyl alcohol is often used as both solvent and hydride source in the Meerwein-Ponndorf-Verley reduction and other transfer hydrogenation reactions; it is oxidized to acetone. Isopropyl alcohol may be converted to 2-bromopropane using phosphorus tribromide, or dehydrated to propene by heating with sulfuric acid. Like most alcohols, isopropyl alcohol reacts with active metals such as potassium to form alkoxides which can be called isopropoxides. The reaction with aluminium (initiated by a trace of mercury) is used to prepare the catalyst aluminium isopropoxide.[3] Isopropanol becomes increasingly viscous with decreasing temperature. At temperatures below -70C isopropanol resembles maple syrup in viscosity. [edit]Production In 1994, 1.5 million tonnes of isopropyl alcohol was produced in the United States, Europe, and Japan.[4] This compound is primarily produced by combining water and propene in a hydration reaction. Of minor significance is the hydrogenation of acetone.[4][5] There are two routes for the hydration process: indirect hydration via the sulfuric acid process, and direct hydration. The former process, which can use low-quality propene, predominates in the USA while the latter process, which requires high-purity propene, is more commonly used in Europe. These processes give predominantly isopropyl alcohol rather than 1-propanol because the addition of water or sulfuric acid to propene follows Markovnikovs rule. Indirect hydration The indirect process reacts propene with sulfuric acid to form a mixture of sulfate esters. Subsequent hydrolysis of these esters by steam produces isopropyl alcohol, which is distilled. Diisopropyl ether is a significant by-product of this process; it is recycled back to the process and hydrolyzed to give the desired product.[4] Direct hydration Direct hydration reacts propene and water, either in gas or liquid phases, at high pressures in the presence of solid or supported acidic catalysts. Higher purity propylene (> 90 %) tends to be required for this type of process.[4] Both processes require that the isopropyl alcohol be separated from water and other by-products by distillation. Isopropyl alcohol and water form an azeotrope and simple distillation gives a material which is 87.9% by weight isopropyl alcohol and 12.1% by weight water.[6] Pure (anhydrous) isopropyl alcohol is made by azeotropic distillation of the wet isopropyl alcohol using either diisopropyl ether or cyclohexane as azeotroping agents.[4] Hydrogenation of acetone Crude acetone is hydrogenated in the liquid phase over Raney nickel or a mixture of copper and chromium oxide to give isopropyl alcohol. This process is useful when coupled with excess acetone production, such as the cumene process.[4] [edit]Uses In 1990, 45 thousand tonnes of isopropyl alcohol were used in the United States. The vast majority of isopropyl alcohol was used as a solvent for coatings or for industrial processes. Isopropyl alcohol in particular is popular for pharmaceutical applications,[4] presumably due to the low toxicity of any residues. Some isopropyl alcohol is used as a chemical intermediate. Isopropyl alcohol may be converted to acetone, but the cumene process is more significant. In that year, a significant fraction (5.4 tonnes) was consumed for household use and in personal care products. It is also used as a gasoline additive.[4] [edit]Solvent Isopropyl alcohol dissolves a wide range of non-polar compounds. It also evaporates quickly and is relatively non-toxic, compared to alternative solvents. Thus it is used widely as a solvent and as a cleaning fluid, especially for dissolving oils. Examples of this application include cleaning electronic devices such as contact pins (like those on ROM cartridges), magnetic tape and disk heads (such as those in audio and video tape recorders and floppy disk drives), the lenses of lasers in optical disc drives (e.g. CD, DVD) and removing thermal paste from heatsinks and IC packages (such as CPUs.[7]) Isopropyl alcohol is used in keyboard, LCD and laptop cleaning, is sold commercially as a whiteboard cleaner, and is a strong but safer alternative to common household cleaning products. It is used to clean LCD and glass computer monitor screens (at some risk to the anti-reflection coating on some screens[citation needed]), and used to give second-hand or worn non-vinyl phonograph records newer-looking sheen. Isopropyl alcohol should not be used to clean vinyl records as it may leach plasticizer from the vinyl making it more rigid[citation needed]. It is effective at removing residual glue from some sticky labels although some other adhesives used on tapes and paper labels are resistant to it. It can also be used to remove stains from most fabrics, wood, cotton, etc. In addition it can also be used to clean paintballs or other oil based products so that they may be reused, commonly known as repainting. It is used as a wetting agent in the fountain solution used in lithographic printing, and often used as a solvent for French polishing shellac used in cabinet making. [edit]Intermediate Isopropyl alcohol is esterified to give isopropyl acetate, another solvent. It reacts with carbon disulfide to give sodium isopropylxanthate, a weed killer. Isopropyl alcohol reacts with titanium tetrachloride and aluminium metal to give titanium and aluminium isopropoxides respectively, the former a catalyst, and the latter a chemical reagent.[4] This compound may serve as a chemical reagent in itself, by acting as a dihydrogen donor in transfer hydrogenation. [edit]Medical Disinfecting pads typically contain a 60ÃÆ' ¯Ã‚ ¿Ã‚ ½70% solution of isopropyl alcohol in water. A 75 % v/v solution in water may be used as a hand sanitizer.[8] Isopropyl alcohol is used as a water-drying aid for the prevention of otitis externa, better known as swimmers ear.[9] [edit]Automotive Isopropyl alcohol is a major ingredient in gas dryer fuel additives. In significant quantities, water is a problem in fuel tanks, as it separates from the gasoline, and can freeze in the supply lines at cold temperatures. It does not remove water from gasoline; rather, the alcohol solubilizes water in gasoline. Once soluble, water does not pose the same risk as insoluble water as it will no longer accumulate in the supply lines and freeze. Isopropyl alcohol is often sold in aerosol cans as a windscreen de-icer. Isopropyl alcohol is also used to remove brake fluid traces from hydraulic braking systems, so that the brake fluid (usually DOT 3, DOT 4 or mineral oil) does not contaminate the brake pads, which would result in poor braking. [edit]Laboratory As a biological specimen preservative, isopropyl alcohol provides a comparatively non-toxic alternative to formaldehyde and other synthetic preservatives. Isopropyl alcohol solutions of 90ÃÆ' ¯Ã‚ ¿Ã‚ ½99% are used to preserve specimens. Isopropyl alcohol is often used in DNA extraction. It is added to a DNA solution in order to precipitate the DNA into a pellet after centrifuging the DNA. This is possible because DNA is insoluble in isopropyl alcohol. [edit]Safety Isopropyl alcohol vapor is denser than air and is highly flammable with a very wide combustible range. It should be kept away from heat and open flame. When mixed with air or other oxidizers it can explode through deflagration.[10] Isopropyl alcohol has also been reported to form explosive peroxides.[10][11] Like many organic solvents, long term application to the skin can cause defatting.[12] [edit]Toxicology Isopropyl alcohol and its metabolite, acetone, act as central nervous system (CNS) depressants. Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, CNS depression, nausea, vomiting, anesthesia, and coma. Poisoning can occur from ingestion, inhalation, or absorption; therefore, well-ventilated areas and protective gloves are recommended. Around 15 g of isopropyl alcohol can have a toxic effect on a 70 kg human if left untreated.[13] However, it is not nearly as toxic as methanol or ethylene glycol. Isopropyl alcohol does not cause an anion gap acidosis (in which as lowered blood serum pH causes depletion of bicarbonate anion) unlike ethanol and methanol. Isopropyl alcohol does however, produce an osmolal gap between the calculated and measured osmolalities of serum, as do the other alcohols. Overdoses may cause a fruity odor on the breath as a result of its metabolism to acetone, which is further metabolized to produce the nutrients acetate and glucose.[14] Isopropyl alcohol is oxidized to form acetone by alcohol dehydrogenase in the liver.